Miele DA5341D 작동 및 설치 지침 - 페이지 6

{카테고리_이름} Miele DA5341D에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA5341D 32 페이지. Decorator island hood
Miele DA5341D에 대해서도 마찬가지입니다: 제품 치수 (2 페이지)

페이지 인쇄

IMPORTANT SAFETY INSTRUCTIONS

Installation

, WARNING

To reduce the risk of fire only use

metal ductwork.

Any fittings, sealant, or materials

used to install the ductwork must be

made of approved non-flammable

materials.

Provided a larger distance is not

given by the manufacturer of the

cooktop, follow the minimum safety

distances between a cooktop and the

bottom of the hood:

– 22" (550 mm) above electric

cooktops,

– 30" (762 mm) above gas cooktops,

– 26" (650 mm) above an open electric

grill or an open electric boiler/fryer.

If local building codes require a greater

safety distance, follow their

requirement.

If there is more than one appliance

beneath the hood and they have

different minimum safety distances

always select the greater distance.

Do not install this hood over

cooktops burning solid fuel.

Do not use an extension cord to

connect the appliance to electricity.

Extension cords do not guarantee the

required safety of the appliance,

(e.g. danger of overheating).

Never connect an exhaust hood to

an active chimney, dryer vent, vent flue,

or room ventilating ductwork. Seek

professional advice before connecting

an exhaust hood vent to an existing,

inactive chimney or vent flue.

WARNING - TO REDUCE THE RISK

OF FIRE, ELECTRIC SHOCK, OR

INJURY TO PERSONS, OBSERVE

THE FOLLOWING:

Installation work and electrical

wiring must be done by qualified

person(s) in accordance with all

applicable codes and standards,

including fire-rated construction.

Sufficient air is needed for

combustion and exhausting of gases

through the flue (chimney of fuel

burning equipment to prevent back

drafting. Follow the heating equipment

manufacturer's guideline and safety

standards such as those published by

the National Fire Protection Association

(NFPA) and the American Society for

Heating, Refrigeration and Air

Conditioning Engineers (ASHRAE), and

the local code authorities.

When cutting or drilling into wall or

ceiling, do not damage electrical wiring

and other hidden utilities.

Ducted fans must always be vented

to the outdoors.