Miele DAS 8930 작동 및 설치 지침 - 페이지 20

{카테고리_이름} Miele DAS 8930에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DAS 8930 44 페이지.

Before using for the first time

 Start the WiFi connection on your

WiFi router.

When successfully connected, 2 and 3

will light up constantly.

 Exit connection mode on the

ventilation hood by touching the

delayed shutdown control .

The ventilation hood can now be

operated via the app.

If the connection fails, you have

probably not activated WPS on your

router quickly enough. Repeat the steps

above.

Tip: If your WiFi router does not support

WPS, please connect via the Miele app.

Signing out of WiFi (reset to factory

settings)

To set up a new WiFi connection, the

existing WiFi connection must be

disconnected.

 Touch the On/Off switch .

All symbols light up with reduced

brightness.

 Press and hold the delayed shutdown

control  until the grease filter 

and charcoal filter  symbols light

up.

 Touch the 1 control.

With an existing WiFi connection, 2 and

3 will light up constantly.

The ventilation hood is ready for

disconnection during the next two

minutes.