Miele Novotronic T 220 사용 설명서 - 페이지 33
{카테고리_이름} Miele Novotronic T 220에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele Novotronic T 220 44 페이지. Novotronic vented tumble dryer
Miele Novotronic T 220에 대해서도 마찬가지입니다: 사용 설명서 (44 페이지)
페이지 인쇄
Venting system with
plastic piping
Plastic piping is a good option where
the vented air has to be ducted for
some distance. The smooth walls of
the pipe are less resistant to the
vented air than the walls of a flexible
vent hose, for example. Time and en-
ergy consumption are better with
plastic piping.
^ The following items are required: . .
. . . an adapter* with rib on the inside.
. . . a wall vent kit* or window vent
kit*.
* (Miele optional accessory)
. . . Suitable piping available from
your dealer or builder's merchant.
Where the pipe diameter is more than
100 mm, additional adapters are nec-
essary (e.g. to increase from C 100
to 125 mm) to connect the pipe to the
dryer.
A The ring adapter (1) only needs to be
fitted into the Miele adapter (2), if the
total duct length is less than 10 m.
Installation - venting
If the total duct length is greater than
10 m the ring adapter is not required.
B Fit Miele adapter (2) into the vent
opening on the dryer.
C Attach the pipe (3).
Example
1. Wall vent kit
(Separate fitting instructions are
supplied with the Miele wall vent kit).
2. Adapter
3. Plastic piping, diameter DN 100
33