Miele PT 7186 Vario 사용 설명서 - 페이지 36
{카테고리_이름} Miele PT 7186 Vario에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele PT 7186 Vario 40 페이지. Tumble dryer
Miele PT 7186 Vario에 대해서도 마찬가지입니다: 커미셔닝, 프로그램 차트 및 설정 (40 페이지)
Settings/Supervisor level menu
Settings which can only be
changed during the
commissioning process
If you wish to change the settings after
the commissioning process, please
contact the Miele Service Department.
Payment system
A coin box needs to be fitted.
– No coin box
– Program operation*
The tumble dryer is operated using a
coin box. The user purchases a
wash program.
– Timed operation*
The tumble dryer is coin-operated
using a time meter. The user
purchases a time-controlled
program.
– RS 232*
When the tumble dryer is
coin-operated, serial interface RS
232 is activated.
– IK6*
When the tumble dryer is
coin-operated, serial interface RS
232 for the IK6 is activated.
* Then the following settings are
offered: Coin mechanism lock, Signal to
Pin 7, T-max exceeded, Duration cool
air, Cool air free, Duration hot air.
36
Coin mechanism lock
In coin operation mode, the payment
system can be set so that
programming changes can be made
within a specified time period without
losing the coins.
– Off
– Immediately after starting
Cancellation and changes not
possible without loss of payment.
– 1 minute after starting
(up to 5 minutes)
Cancellation and changes not
possible after this time period without
loss of payment.
Signal to pin 7
Setting the feedback signal for the
coin box.
– Program end
A signal is sent to pin 7 on the coin
mechanism at the end of the
program.
– Release the start button
A signal is sent to pin 7 on the coin
mechanism when the start button is
released.
– Start and program end
A signal is sent to pin 7 on the coin
mechanism when the start button is
released and at the end of the
program.