Miele T8013C 작동 및 설치 지침 - 페이지 25
{카테고리_이름} Miele T8013C에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele T8013C 40 페이지. Large capacity vented dryer angled control
Miele T8013C에 대해서도 마찬가지입니다: 제품 치수 (11 페이지), 치수 매뉴얼 (9 페이지)
페이지 인쇄
What if the "Filter/Vent" fault indicator is lit?
Possible fault
The lint filter is clogged.
The air supply in the room is
insufficient.
What if the program runs too long or stops?
Possible fault
The airflow is insufficient in the area of
the dryer.
The lint filters are clogged.
The laundry was not spun sufficiently in
the washer.
The dryer is overloaded.
Metal zippers interfere with the dryer's
moisture sensors.
The condenser is clogged with lint or
detergent residue.
The air vent below the door is blocked.
What if the laundry is not dry enough?
Possible fault
The load contained too many dissimilar items (size and fabric.)
What if water has collected around the drum opening?
Possible fault
This is condensed moisture from the laundry.
Frequently asked questions
Solution
Clean the lint filters. See "Dryer care".
Open a window or door to increase
airflow.
Solution
Open a window or door to increase
airflow.
Clean the lint filters (see "Dryer care").
Select a higher spin speed in the wash
program.
Reduce the load size.
Select a timed program to avoid over
drying.
Clean the condenser periodically (see
"Dryer care").
Remove any blockages.
21