HP 6000 - ProLiant - 128 MB RAM 설정 유틸리티 매뉴얼 - 페이지 15
{카테고리_이름} HP 6000 - ProLiant - 128 MB RAM에 대한 설정 유틸리티 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 6000 - ProLiant - 128 MB RAM 19 페이지. F10 utility business pcs
HP 6000 - ProLiant - 128 MB RAM에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지), 지원 목록 (34 페이지)
페이지 인쇄
Computer Setup—Power
NOTE:
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 5
Computer Setup—Power
Option
OS Power
Management
Hardware Power
Management
Thermal
ENWW
Description
●
S5 Maximum Power Savings—Enable/Disable. Enabling this feature reduces the power of this
system as much as possible in the S5 state. Power is removed from the wake up circuitry, the
expansion slots, and any management features while in S5.
●
Runtime Power Management— Enable/Disable. Allows certain operating systems to reduce
processor voltage and frequency when the current software load does not require the full
capabilities of the processor.
●
Idle Power Savings—Extended/Normal. Allows certain operating systems to decrease the
processors power consumption when the processor is idle.
●
ACPI S3 Hard Disk Reset—Enabling this causes the BIOS to ensure hard disks are ready to
accept commands after resuming from S3 before returning control to the operating system.
●
ACPI S3 PS2 Mouse Wakeup—Enables or disables waking from S3 due to PS2 mouse activity.
●
USB Wake on Device Insertion (some models)—Allows system to wake from Standby on USB
device insertion.
●
Unique Sleep State Blink Rates—Enable/Disable. This feature is designed to provide a visual
indication of what sleep state the system is in. Each sleep state has a unique blink pattern.
◦
S0 = Solid green LED.
◦
S3 = 3 blinks at 1Hz (50% duty cycle) followed by a pause of 2 seconds (green LED) —
repeated cycles of 3 blinks and a pause.
◦
S4 = 4 blinks at 1Hz (50% duty cycle) followed by a pause of 2 seconds (green LED) —
repeated cycles of 4 blinks and a pause.
◦
S5 = LED is off.
NOTE:
If this feature is disabled, S4 and S5 both have the LED off. S1 (no longer supported)
and S3 use 1 blink per second.
SATA power management enables or disables SATA bus and/or device power management.
Fan idle mode—This bar graph controls the minimum permitted fan speed.
NOTE:
This setting only changes the minimum fan speed. The fans are still automatically
controlled.
Computer Setup (F10) Utilities
9