HP 800 Series 릴리스 노트 - 페이지 13

{카테고리_이름} HP 800 Series에 대한 릴리스 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 800 Series 19 페이지. Version a.01.08
HP 800 Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (34 페이지)

Chapter 1

Known Problems and Workarounds

For the CIFS/9000 Client

•

The CIFS/9000 Client with ASU/9000 Servers

There is a known, infrequent problem between the CIFS/9000 Client

and ASU. If you ﬁnd that a connection to an ASU server becomes

inaccessible, turn off opportunistic locks (oplocks) for

communications with ASU, in the CIFS Client conﬁguration ﬁle

/etc/opt/cifsclient/cifsclient.cfg. Oplocks can be turned off globally,

in the defaultServer section, by setting requestOplock=no. A

preferred method is to turn off oplocks only for ASU servers. To do so,

ﬁrst add the following lines, if they are not already present, to the

serverClasses section. Then, to turn off oplocks for only this class of

server, set requestOplock=no:

{

// Match ASU:

OS = "*";

LanManager = "*Advanced Server*";

config = {

disableSmbs = (

setattrTrans2SetFile,

setattrTrans2SetPath,

);

requestOplock = no;

};

}

•

Removing a Directory and its Contents

Removing a directory and its contents in one step using the

command, rm -rf <directory>, may fail on directories located on a

cifsmount. If the directory contains ~30 or more ﬁles, only part of the

directory contents will be removed and the directory itself will

remain since its contents have not been removed

A workaround is to remove the directory and its contents in two steps

1. rm -rf <dir>/*

2. rmdir <dir>

Known Problems and Workarounds

// these are additional to other config

// don't use trans2/setfileinfo

// don't use trans2/setpathinf

# Remove directory contents.

# Remove directory itself.

CIFS/9000 Client A.01.08