HP 8730w - EliteBook Mobile Workstation 설정 및 구성 매뉴얼 - 페이지 16

{카테고리_이름} HP 8730w - EliteBook Mobile Workstation에 대한 설정 및 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 8730w - EliteBook Mobile Workstation 18 페이지. Mobile workstation
HP 8730w - EliteBook Mobile Workstation에 대해서도 마찬가지입니다: 브로셔 및 사양 (8 페이지), 사용자 설명서 (15 페이지), 브로셔 및 사양 (4 페이지), 네트워크 매뉴얼 (16 페이지), 사용자 설명서 (27 페이지), 개요 (16 페이지), 소프트웨어 설치 매뉴얼 (8 페이지), 사용자 설명서 (37 페이지), 사용자 설명서 (27 페이지), 사용자 설명서 (15 페이지), 빠른 사양 (46 페이지)

HP 8730w - EliteBook Mobile Workstation 설정 및 구성 매뉴얼

Appendix A: Power / Sleep / Global States Explained

Under Advanced Configuration and Power Interface (ACPI) specification a PC can be in one of
several Power states. These power states are also known as Sleep (Sx) states or Global (Gx) states.
S0
is the ON state. The PC is fully functioning. All system devices and operating system, if
available, are running.
S3
is the Standby (Microsoft terminology) or Suspend-to-RAM state. The memory subsystem and
V
power rail remains powered, while the rest of the system including the processor are not
aux
powered. When the system resumes from S3, the system context remains intact because the
system memory was preserved and powered at all times.
S4
is the Hibernate (Microsoft terminology) or Suspend-to-Disk state. The system context (memory)
is saved to the hard drive as a hibernation file. When the system resumes from S4, the system
context is restored from the hibernation file. V
including system memory and the processor are not powered.
S5
is the Soft Off state. It is identical to S4 with the exception that the system context is not
saved. When the system resumes from S5, it will power up and going through POST.
remains powered, but all other subsystems
aux
16