Miele S 600 Series 사용 설명서 - 페이지 11

{카테고리_이름} Miele S 600 Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele S 600 Series 44 페이지. Miele operating instructions vacuum cleaners s 500 - s 548, s 600 - s 648
Miele S 600 Series에 대해서도 마찬가지입니다: 사용 설명서 (48 페이지)

페이지 인쇄

Fitting the floorhead

^ Push the suction tube into the floor-

head and turn it clockwise or anti-

clockwise until it clicks into position.

^ To release the floorhead from the suc-

tion tube press the locking button

(see arrow) and pull the suction tube

away from the floorhead.

The floorhead can be used for all nor-

mal cleaning of carpets and rugs. It can

also be used with the brush protruding

to vacuum hard flooring which is not

susceptible to scratching. For hard

flooring, such as stone and floors which

are susceptible to scratching, e.g. par-

quet, we recommend using one of the

special Miele floor brushes (see "Ac-

cessories available as optional extras").

It is also important to observe the

flooring manufacturer's cleaning and

care instructions.

Vacuum carpets and rugs with the

brush retracted:

^ Press the foot switch marked g.

Clean hard flooring which is not sus-

ceptible to scratching with the brush

protruding:

^ Press the foot switch marked h.

Electrobrush / Turbobrush

Some models may be supplied with an

Electrobrush or a Turbobrush as a stan-

dard accessory as well as a normal

floorhead (see "Accessories available

as optional extras"). Please refer to the

separate operating instructions sup-

plied with these brushes for instructions

on use and maintenance.

Preparing for use