Miele CS 1223 작동 및 설치 지침 - 페이지 16
{카테고리_이름} Miele CS 1223에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele CS 1223 40 페이지. Induction wok
Miele CS 1223에 대해서도 마찬가지입니다: 작동 및 설치 지침 (48 페이지), 작동 및 설치 지침 (44 페이지), 작동 및 설치 지침 (40 페이지), 작동 및 설치 지침 (44 페이지)
페이지 인쇄
Safety features
Overheating protection
The induction coils are fitted with an
overheating protection feature. This
prevents the induction coils from
overheating by:
– If the booster function is being used,
it will be switched off.
– If the temperature continues to rise
after the booster function is switched
off, the power level will be reduced.
– If the temperature still continues to
rise after the power level has been
reduced, the appliance will switch off
and an H will appear in the display.
^ Turn the control knob to "0".
Once the H has gone out the combiset
can be used again as normal.
If the control knob is not turned back to
"0", C and 0 will flash in the display once
the burner has cooled. To use the
combiset again, first turn the control
knob to "0".
16
Overheating can be caused by:
– using the appliance for too long at
the maximum power level.
– there being insufficient ventilation to
the appliance.
If a drawer is installed directly under
the combiset, sufficient space must be
kept between the drawer and its
contents and the underside of the
appliance in order to ensure sufficient
ventilation of the appliance.
If the overheating protection feature
triggers again, contact Miele Technical
Service.