ALLNIC AUDIO L-10000 소유자 매뉴얼 - 페이지 6
{카테고리_이름} ALLNIC AUDIO L-10000에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ALLNIC AUDIO L-10000 17 페이지. Otl/ocl line-stage preamplifier
페이지 인쇄
•
Minimal negative feedback
For its balanced (XLR) outputs, permalloy transformers, like those used in Allnic's
•
transformer-coupled preamplifiers, are employed.
•
As are all Allnic Audio products, the L-10000 OTL/OCL is fully RoHS (EU Reduction of
Hazardous Substances regulation) compliant in construction and materials
WHAT'S IN THE BOX?
Please check that the shipping box contains the following:
One (1) Allnic L-10000 OTL/OCL Preamplifier – in natural aluminum or black, depending on
•
your order specification
•
One (1) power cord
•
One (1) remote control
Two (2) x AAA batteries for the remote control
•
One (1) Owner's Manual
•
Note:
1) The L-10000 OTL/OCL ships with the tubes installed.
2) The L-10000 OTL/OCL will work with most IEC type aftermarket power cords. The Allnic ZL-
3000 and ZL-5000 power cables will make an excellent match. Of course, only you can
determine the power cord that works most synergistically with the L-10000 OTL/OCL in
your system.
3) Be sure the L-10000 OTL/OCL is labeled for the AC voltage of your location. If it is not, DO
NOT connect it to your AC outlet. Please contact your Allnic dealer.
We advise that you keep the box and other packing materials that your L-10000 OTL/OCL came
in. It will be useful if you sell your L-10000 OTL/OCL or in the unlikely event you need to ship it
for service.
SAFETY
•
CAREFULLY and SLOWLY remove ALL cardboard and Styrofoam cushioning material inside
the tube chimneys before operation.
Disconnect the power cord by pulling the plug, not the cable.
•
Keep the power cord away from any heat source.
•
•
Keep the unit away from liquids – do not allow any liquid to enter the interior of the unit.
•
When the unit is moved from a cold to a warm environment, allow sufficient time for any
condensation to evaporate before plugging the unit into an AC connection.
6