ALLNIC AUDIO T-1800 MK2 소유자 매뉴얼 - 페이지 5
{카테고리_이름} ALLNIC AUDIO T-1800 MK2에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ALLNIC AUDIO T-1800 MK2 13 페이지. El34 stereo integrated amplifier
페이지 인쇄WHAT'S IN THE BOX?
Please check that the shipping box contains the following:
•
One (1) Allnic T-1800 MK2 EL34 stereo integrated amplifier
•
One (1) Allnic remote control
•
Two (2) x AAA batteries for the remote control
•
One (1) Allen wrench for screws on top of the tube chimneys
•
One (1) IEC type power cord
•
One (1) Owner's Manual
Note:
1)
The T-1800 MK2 ships with the tubes installed.
2)
The T-1800 MK2 will work with most IEC type aftermarket power cords. The Allnic ZL-3000 and ZL-
5000 power cables will make an excellent match. Of course, only you can determine the power cord
that works most synergistically with the T-1800 MK2 in your system.
3)
Be sure the T-1800 MK2 is labeled for the AC voltage of your location. If it is not, DO NOT connect it
to your AC outlet. Please contact your Allnic dealer.
We advise that you keep the boxes and other packing materials that your T-1800 MK2 came in. It will be useful
if you sell your T-1800 MK2 or in the unlikely event you need to ship it for service.
SAFETY
•
Remove ALL protective cushioning material (cardboard around the tubes) inside the tube chimneys
before operation. The tube chimneys should contain NOTHING except the tubes
leave the "O" rings on the small tubes; some prefer the sound with the O rings on).
•
Disconnect the power cord by pulling the plug, not the cable.
•
Do not attempt any repairs. Do not remove the unit's chassis cover without specific authorization from
Hammertone Audio.
•
Keep the power cord away from heat sources
•
Keep the unit away from liquids – do not allow any liquid to enter the interior of the unit.
•
When the unit is moved from a cold to a warm environment, allow sufficient time for any condensation to
evaporate before plugging the T-1800 MK2 into an AC connection.
•
Do not attempt any repairs.
•
See the notes on "Location, Location, Location".
CLEANING
A.
Chassis and glass/plastic
Use only a soft, lint-free cloth, dampened slightly with water only (NO cleaning fluids!), to clean the faceplate,
chassis and tube chimneys of the T-1800 MK2.
B.
Connectors
You may use any good quality contact cleaner recommended for such applications to clean the contacts from
time to time, as you deem appropriate.
4
(It is optional to