ALLNIC AUDIO T-2000 소유자 매뉴얼 - 페이지 7

{카테고리_이름} ALLNIC AUDIO T-2000에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ALLNIC AUDIO T-2000 17 페이지. 30th anniversary stereo integrated amplifier
ALLNIC AUDIO T-2000에 대해서도 마찬가지입니다: 소유자 매뉴얼 (11 페이지)

페이지 인쇄

CLEANING

Chassis and glass/plastic

Use only a soft, lint-free cloth, dampened slightly with water only (NO cleaning fluids!), to clean the

faceplate, chassis and tube chimneys of the T-2000 30th Anniversary.

Connectors

You may use any good quality contact cleaner recommended for such applications to clean the contacts

from time to time, as you deem appropriate.

INITIAL SET-UP

LOCATION, LOCATION, LOCATION

Like all audio products using tubes, the Allnic Audio T-2000 30th Anniversary needs to be placed on a

solid stand in a location that provides good air circulation around, above and below the stereo amplifier.

• DO NOT cover the top of the T-2000 30th Anniversary.

• DO NOT place the unit on carpet or foam.

• DO NOT subject the unit to knocks and shocks as you move it around. This advice is meant

particularly for those who may want to place the T-2000 30th Anniversary on some kind of after-

market isolation feet or similar devices. Dropping one side of the T-2000 30th Anniversary, or the

whole of the unit may cause damage and may void warranty.

• DO NOT place the unit near a strong light or heat source.

• DO NOT place anything heavy on the unit.

• DO NOT allow rubber or vinyl materials to rest on the chassis for long periods of time. This could

discolour the metal.

• DO place the unit on a shelf or stand that is stable and not subject to vibration or sudden shock.

• DO consider using a high quality power cord, inter-connects and speaker cables. The T-2000 30th

Anniversary is a highly sensitive piece of electronic designed for neutrality and will output what

you put into it. Allnic's Zero Loss Technology cables will work synergistically with the T-2000 30th

Anniversary.

• DO try to place T-2000 30th Anniversary away from major sources and potential receivers of RFI

and EMI. Though well shielded, the T-2000 30th Anniversary will function best away from large

power transformers and other sources of such interference and from other equipment that could

be susceptible to/sources of such forms of interference.

INPUTS

There are three (3) RCA type female input pairs and two (2) balanced (XLR) input pairs. Facing the rear of

the chassis, the input connections are to the right of the IEC power input. The left channel connector is the

top one in each line input pair. Please refer to Figure 5.