ALLNIC AUDIO D-3000 소유자 매뉴얼 - 페이지 3

{카테고리_이름} ALLNIC AUDIO D-3000에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ALLNIC AUDIO D-3000 11 페이지. Digital to analog converter

WHAT IS IN THE BOX?

Please check that the shipping box contains the following:

One (1) Allnic D-3000 DAC – in natural aluminum or black, depending on your order

•

specification

One (1) Apple remote control

•

One (1) Owner's Manual

•

Note:

The D-3000 DAC ships with the tubes installed and equipped with an O-ring each.

The D-3000 will work with most IEC type aftermarket power cords. Of course, only you can

determine the power cord that works most synergistically with the D-3000 in your system.

Be sure the D-3000 DAC is labeled for the AC voltage of your location. If it is not, please

contact Audiomentors.

We advise that you keep the box and other packing materials that your D-3000 DAC came in. They

will be useful if you sell your D-3000, or in the unlikely event you need to ship the unit for service.

SAFETY!!

• Disconnect power cords by pulling the plug, not the cable.

• Do not attempt any repairs. Do not remove the unit's chassis cover without specific authorization

from Audiomentors.

• Keep all cables away from heat sources.

• Ensure there is plenty of free space around and above the unit.

• Keep the unit away from liquids – do not allow any liquid to enter the interior of the unit.

• When the unit is moved from a cold to a warm environment, allow sufficient time for any

condensation to evaporate before plugging the D-3000 into an AC connection.

• See the notes on "Location, Location, Location".

CLEANING

Chassis