ALLO BOSS 1.2 매뉴얼 - 페이지 3

{카테고리_이름} ALLO BOSS 1.2에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ALLO BOSS 1.2 3 페이지.

Before powering on the unit please read the following

The BOSS v1.2 power jumper in your player is ON.

* the BOSS with the DC to typeC USB adapter cable provided

* the RPI with the DC to microUSB adapter cable provided

If you want to feed power to both boards, please open your case and remove the jumper.

1. LEDs are on, means power is fed to both boards. If not, check power source.

2. RPI LED intermittent, mean OS booted properly. If static, try to power on again.

3. Ethernet LED intermittent, means its connected to network. If not, try to re-boot.

•

After 1-2 mins, the unit should be visible on your network.

•

You can access the user interface by accessing the IP or simply type: volumio.local or

dietpi.local

For more information, please visit ALLO.com / Plug & Play /

BOSS Player Support & Downloads at the bottom of the page

This means that you can feed power to:

DO NOT FEED POWER TO BOTH

BOSS 1.2 POWER JUMPER INSTRUCTIONS

Boot-Up Checklist