ALLO 3CX 구성 매뉴얼 - 페이지 6

{카테고리_이름} ALLO 3CX에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ALLO 3CX 8 페이지. Analog active card

2. ALLO Analog Card configuration

For Analog card installation, refer quick installation guide:

1) Open GUI of the analog gateway and Go to Trunks (Analog&SIP) and Click

on VOIP Trunks and Create New SIP trunk.

2) Select Type SIP and enter all the details as shown below.

In this example, the IP address of 3CX IPPBX is 192.168.0.104

Note: Username and Password should be the same as provided in 3CX trunk

Configuration.

If you want DID routing, you can check the DID Routing Check Box. All the calls

coming inside the gateway through this 3CX trunk will go to DID routing table.

3) Click SAVE and APPLY CHANGES. You can see the registered Status in the

System Status page.

ALLO Analog Card Configuration Guide for 3CX – V1.0

.......................................................................................................

Page 6