Allo RemoteControl AVIDSEN 104250 BRICO 지침 - 페이지 2

{카테고리_이름} Allo RemoteControl AVIDSEN 104250 BRICO에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Allo RemoteControl AVIDSEN 104250 BRICO 2 페이지.

Second type of receiver:

1. Open the casing of your receiver. It is located next to your motor.

2. On the receiver circuit board, press the programming button (RX). Release the

button. The receiver LED comes on. Wait 5 seconds. The receiver LED light turns off.

3. Press a button on your new remote control. Keep it pressed down. The receiver LED

light turns on, Release the button

4. Wait 10 seconds.

5. Your new remote control is programmed

Visit our Website: www.alloremotecontrol.com