ABB ACH580-01 Series 사용 설명서 - 페이지 3

{카테고리_이름} ABB ACH580-01 Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ABB ACH580-01 Series 7 페이지. Base drive replacement
ABB ACH580-01 Series에 대해서도 마찬가지입니다: 매뉴얼 (16 페이지), 빠른 설치 및 시작 매뉴얼 (17 페이지), 사용 설명서 (8 페이지), 빠른 설치 및 시작 매뉴얼 (17 페이지), 빠른 설치 및 시작 매뉴얼 (17 페이지)

REPLACEMENT INSTRUCTIONS | ACH580-01 VXR UL TYPE 1 , R2/R3/R4

Step

Instruction

Cut zip ties

by pulling out the terminal block.

NOTE: Remove any additional drive I/O wiring.

R4 Frame: Remove zip ties securing the input and output wires to

the drive conduit plate.

R2 & R3 Frame: Using a PZ2 bit, loosen and remove wires from the

input and motor terminals of the drive.

R4 Frame: Using a T20 bit, loosen and remove wires from the input

and motor terminals of the drive.

Using a PZ3 bit, loosen and remove ground wire from the drive.

R2 Frame: Using a T20 bit, loosen and remove two (2) M4x8 screws.

Remove conduit assembly.

R3 Frame: Using a T20 bit, loosen and remove four (4) K40x12

screws. Remove conduit assembly.

R4 Frame: Using a T25 bit, loosen and remove four (4) M5x16

screws. Remove conduit assembly.

and disconnect the RS485 cable

Diagram

from the drive