Allo.com CRA 210 빠른 설치 매뉴얼 - 페이지 5

{카테고리_이름} Allo.com CRA 210에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Allo.com CRA 210 8 페이지. 3 port voip analog telephone adapter 3x ethernet ports, 2x voip lines+1x pstn landline

페이지 인쇄

2. Accessing Your ATA Web Panel

Your ATA Web Panel will allow you to check the status of your account, modify network and SIP

settings (if you have purchased an Unlocked ATA), and upgrade your ATA's Firmware.

2.1. To access your ATA Web Panel, follow these simple guidelines:

With your ATA connected, pick up your telephone's receiver and press ** (Star

2.1.1.

key, twice). You will hear a woman's voice giving you an IP Address.

After writing down the ATA's IP Address using the procedure described in the

2.1.2.

previous section, open a web browser application (such as Internet Explorer or

FireFox).

2.1.3.

In the Address Bar of your browser, type the following: http://<IP Address> where

the <IP address> is the IP we noted earlier in step 2.1.1).

2.1.4.

An example would be this:

2.1.5.

You will be brought to a Login screen. Be sure to select "Admin" and use the

following default login information:

2.1.6.

Now you are logged in!

2.1.7.

On the main screen, you can access, modify or view your SIP Proxy Status, along

with your username. Once configured properly (please contact your SIP or VOIP

provider for all required pieces of data) It should then show "Registered", as in the

screen shot below:

http://192.168.1.101

Username: admin

Password: admin