Allo.com 4aCP1eL 설치 매뉴얼 - 페이지 11
{카테고리_이름} Allo.com 4aCP1eL에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Allo.com 4aCP1eL 14 페이지. Digital card
Allo E1/T1 PRI Card Quick Installation Guide
3.3 Installation of Asterisk
Download the latest asterisk version from:
http://downloads.asterisk.org/pub/telephony/asterisk/
following command.
#wget
http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-11-
current.tar.gz
Go to asterisk folder and compile the packages as following
To install asterisk give the following commands:
[root@pbx1 asterisk-11.4.0]#./configure
# make
# make install
# make config
If this is your first Asterisk Install, you should install the sample configuration files, to do this run:
# make samples
4. Software Configurations
Add "alloPL4xxp" at the end of /etc/dahdi/modules file, so that while starting dahdi driver Allo
card modules will load automatically.
Add the line <include "dahdi-channels.conf"> in /etc/asterisk/chan_dahdi.conf
file.
By default the card is ready to use in E1 mode
4.1 T1 mode settings
To configure the card in T1 signaling mode, please add the following,
(i) Add "options alloPL4xxp default_linemode=t1"at the end of
/etc/modprobe.d/dahdi.conf
4.2 Dahdi Configuration
After Dahdi driver installation run the following commands
# /etc/init.d/dahdi start
www.allo.com
and extract the asterisk tar file by giving
Version 2.1
11