Miller XT30i 소유자 매뉴얼 - 페이지 18

{카테고리_이름} Miller XT30i에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller XT30i 44 페이지.

페이지 인쇄

General

Operating Temperature

IP Code − Degree of protection provided by enclosure

Toppling or tilting

Torch −

The XT30i torch is intended for handheld use only. The torch conforms to IEC 60974-7 when used with the Spectrum 500i.

Do not use this torch in combination with any other machines.

Gas Type

Gas Quality

Gas Inlet Flow and Pressure

Gas Filtering

Mild Steel capacities (see Section 6-2 for cutting speeds vs material type and thickness)

Cooling Method

Duty Cycle of Torch

Rating of Electrical Controls (Trigger)

Rating of Electrical Controls (Cup)

Approved Systems

Trigger Protection

Safety Devices

Rated Capacity (edge start)

Sever Cut Capacity (edge start)

Pierce Capacity

*Travel speeds are approximately 80% of maximum.

Dimensions

Weight

Requirements for the torch connection

Use only compressed air which is free from dirt, oil, and water.

Ensure that the connections are properly assigned and tightened.

For torch replacement, see Miller torch manual Part No. OM-254 449

Ensure correct air pressure (flow pressure) and airflow (volume) are set. Insufficient airflow can lead to the torch overheating.

*This equipment is designed for outdoor use. It may be stored, but is not intended to be used outside during precipitation unless sheltered.

OM-256 118 Page 14

A complete Parts List is available at www.MillerWelds.com

−15 to 40 C (5 to 104 F)

IP − International Protection

2 − No ingress of foreign objects



12.5 mm (0.5 in.)

3 − No harmful ingress spraying

C − AC line circuits protected

against ingress of tool . 2.5 mm

dia x 100 mm long (0.1 in. x 4 in.)

S − Fan stationary during water

Up to 15 incline

Clean, moisture−free,

142 L/min (5.0 SCFM)

Particulates to 5 microns

100% at 30 Amps

30 VDC at .1 Amps

30 VDC at 1 Amp

Spectrum 500i w/XT30i torch

Safety trigger guard

Safety interlock devices shut

down power source

457 mm/min (3/8 in. At 18 ipm)*

15.9 mm (5/8 in.)

4.8 mm (3/16 in.)

362 mm (14-1/4 in.) L

210 mm (8-1/4 in.) W

286 mm (11-1/4 in.) H

12.5 kg (27.6 lb) including torch

IP23CS*

water

test

Air or Nitrogen

oil−free

621 kPa (90 PSI)

Air

−−

827 kPa (120 PSI)

Min

Max

−−

− −

−−

− −