Miller Infinity Series 소유자 매뉴얼 - 페이지 18

{카테고리_이름} Miller Infinity Series에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller Infinity Series 32 페이지. Auto-darkening helmets
Miller Infinity Series에 대해서도 마찬가지입니다: 소유자 매뉴얼 (32 페이지)

페이지 인쇄

5-5.

Lens Delay Control

1 Lens Delay Adjustment Buttons

2 Mode Control Button

Use the Lens Delay Short and Long buttons

to adjust the time for the lens to switch to the

clear state after welding or cutting.

The delay is particularly useful in eliminating

bright after-rays present in higher amperage

applications where the molten puddle re-

mains bright momentarily after welding. Use

the Lens Delay Control buttons to adjust de-

lay from 0 to 10 (0.1 to 1.0 second).

The delay ranges for each mode are as

follows:

OM-289711 Page 16

(R)

MEMO(B)

Weld, Cut, And X-Modes - No. 0–No. 10

Grind Mode - No delay adjustment

�

Lens Delay Adjustment Procedure

� Press Mode button to turn helmet On.

� Press Mode button to select desired

� Use Short and Long adjustment buttons

� Begin welding or continue with other

TIME

There is no lens delay adjustment in

the Grind mode.

function: Weld, Cut, or X-Mode.

to select desired delay.

lens adjustments.

ARC

COUNT

MEMO