Miller Soft Start 1 소유자 매뉴얼 - 페이지 13
{카테고리_이름} Miller Soft Start 1에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller Soft Start 1 24 페이지. Om-189 112
페이지 인쇄
3-6. Remote 14 Receptacle Information and Connections
A
AMPERAGE
*The remaining sockets are not used.
3-7. Remote 14 Plug Information and Connections
J
K
I
H
N
M
G
F
E
To Remote 14 Plug on
Welding Power Source
A
AMPERAGE
*The remaining sockets are not used.
OR
Socket*
A
24 volts ac.
B
Contact closure to A completes 24 volts ac contactor control circuit.
C
+10 volts dc output to remote control.
D
Remote control circuit common.
E
0 to +10 volts dc input command signal from remote control.
2
1
A
B
L
C
D
Socket*
A
+15 volts dc input from welding power source.
B
Contact closure to A completes +15 volts dc contactor control circuit.
D
Remote control circuit common.
E
0 to +10 volts dc command signal from remote control to welding power source.
2
4
3
A
J
K
I
B
C L N
H
M
D
G
F
E
Socket Information
Socket Information
1
Remote 14 Receptacle RC
2
Keyway
3
Plug
4
Threaded Collar
To connect to receptacle, align
keyway, insert plug, and tighten
threaded collar.
1
sb7.1 5/94 – ST-800 293 / Ref. S-0004-A / S-0750
1
Remote 14 Plug PLG3
2
Keyway
To connect plug to a Remote 14 re-
ceptacle on the welding power
source, align keyway, insert plug,
and tighten threaded collar.
OM-189 112 Page 9