Miller 1050 운영자 매뉴얼 - 페이지 9

{카테고리_이름} Miller 1050에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller 1050 13 페이지. Fluid head
Miller 1050에 대해서도 마찬가지입니다: 운영자 매뉴얼 (13 페이지)

Operating Instructions

4 Pan / Tilt Drag Control

The Skyline 70 Fluid Head offers 7 selectable positions of fluid

drag + zero setting in the Pan and Tilt. The settings are equally

stepped from light drag in position 1 up to heavy drag in position

7, the drag plates are completely disengaged in position zero.

• Do not Pan or Tilt the Fluid Head whilst adjusting PAN or TILT

DRAG CONTROL or whilst the PAN & TIL DRAG CONTROL is

between settings.

• The drag setting can be changed at any tilt or pan angle.

5 Pan / Tilt Lock Control

The Skyline 70 Fluid Head offers high capacity caliper disc brake

system to hold the Fluid Head in a fixed pan and/or tilt position.

Camera position will not change when applying or releasing the

Pan / Tilt locks.

• Do not pan or tilt the Fluid Head whilst the PAN or the TILT

LOCK is partially applied.

6 Illumination

The Skyline 70 Fluid Head offers illumination of the PAN, TILT,

COUNTERBALANCE CONTROLS AND BUBBLE LEVEL when the

low ambient light conditions exist. Illumination can be achieved by

pressing the ILLUMINATION BUTTON once. The light will switch

off after 10 seconds.

Illumination Button

Tilt Drag Control

Counterbalance Selector

Bubble Level

Pan Drag Control

Fig. 7