Diamond VK38-180 설치 매뉴얼 - 페이지 4

{카테고리_이름} Diamond VK38-180에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Diamond VK38-180 13 페이지.

Thermostat

The thermostat is placed in the control panel, see fig. 2.0.

The thermostat has been pre-set and in most cases it is not necessary to adjust the settings.

When turning on the cabinet the display will show the current temperature in the cabinet.

Indications LED's:

DP1:

Flashing, indicates that a parameter is being changed

Switched on, indicates that the compressor is activated

DP2:

Switched on, indicates that defrosting is activated.

Keyboard lock:

To lock or unlock the keyboard, press these keys simultaneously for about 5 seconds

(to lock the display reads 'Pof', to unlock the display reads 'Pon').

Display set temperature:

Press this key and the display will show the set temperature. Press the key again to return to

normal reading

Fig. 1.9

Fig. 2.0

DP2 DP1