Panasonic AG-HMC150 정보 메뉴 - 페이지 9
{카테고리_이름} Panasonic AG-HMC150에 대한 정보 메뉴을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic AG-HMC150 20 페이지. Avchd camcorder
Panasonic AG-HMC150에 대해서도 마찬가지입니다: 브로셔 및 사양 (8 페이지), 브로셔 및 사양 (12 페이지), 브로셔 (16 페이지), 제품 설명서 (22 페이지), 기본 지침 (20 페이지), 사용자 설명서 (35 페이지)
페이지 인쇄
SW MODE screen (continued)
Display
Item
mode
USER3
(Camera)
(PB)
FOCUS
(Camera)
ASSIST
WFM
(Camera)
LCD
(Camera)
(PB)
Assigns a function to the USER3 button.
The setting contents are the same as USER1.
INDEX
Assigns a function to the FOCUS ASSIST button.
EXPANDED: The central part of the screen will be enlarged by a factor of about
4 in the vertical direction and by a factor of about 6 in the horizontal
direction.
"EXPANDED" is displayed on the screen during the expanded
display.
GRAPH: Displays a frequency distribution graph at the top right in the viewfinder
and LCD monitor.
BOTH: Magnifies the center portion of the image and displays a frequency
distribution graph.
(The frequency distribution graph is displayed on either the viewfinder or
the LCD monitor.)
Switches the waveform display that appears when the WFM button is pressed.
WAVE:
Displays as a waveform. Each time the button is pressed the
setting changes in this order: OFF → WAVE (waveform) → OFF.
VECTOR:
Displays as a vector. Each time the button is pressed the setting
changes in this order: OFF → VECTOR → OFF.
WAVE/VECTOR: Each time the button is pressed the setting changes in this order:
OFF → WAVE (waveform) → VECTOR → OFF.
Assigns a function to the LCD button.
LCD REV:
Flips the LCD image vertically and horizontally.
LCD BL:
Switches the brightness of the LCD backlight.
•
The backlight brightness setting registered in LCD BL will remain stored
even if the function allocated to the LCD button is changed.
Description of settings
indicates the factory setting.
89