Panasonic WV-NF284 - i-Pro Network Camera 설치 매뉴얼 - 페이지 16

{카테고리_이름} Panasonic WV-NF284 - i-Pro Network Camera에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic WV-NF284 - i-Pro Network Camera 36 페이지. Ip video cameras
Panasonic WV-NF284 - i-Pro Network Camera에 대해서도 마찬가지입니다: 사양 (2 페이지), 브로셔 (2 페이지), 참조 (2 페이지), 참조 (2 페이지), 비교 차트 (6 페이지), 사양 (2 페이지), 사양 (2 페이지), 통합 참고 사항 (8 페이지)

페이지 인쇄

Panasonic WV-NF284 - i-Pro Network Camera 설치 매뉴얼

Installations/Connections

Cautions:

ONLY CONNECT THIS TO 12 V DC or 24 V AC CLASS 2 POWER SUPPLY.

Be sure to connect the grounding lead to the GND terminal.

Installation of the camera

Before starting the installation/connection, prepare the required devices and cables. Refer to

the corresponding pages for further information.

z Make a hole in the ceiling and fix the camera mount bracket over it. ( page 17)

x Line up the ends of the cables (power cord, LAN cable and cable from an external device)

and the safety wire, and then bundle them using the provided cable tie. ( page 18)

c Attach the safety wire to the safety wire holder of the camera. ( page 18)

v Connect the power cord (from a DC 12 V or an AC 24 V power supply), a LAN cable (cate-

gory 5 or better) and an external device. ( pages 21 - 23)

b Mount the camera onto the camera mount bracket. ( page 18)

n Adjust angle of the camera, angular field of view and focus. ( pages 26 and 27)

Ceiling

Camera mount bracket

(provided as a standard

accessory)

Cable tie (provided as a

standard accessory)

Note:

When the camera is installed just above the photogenic subject

as q in the illustration, it may be difficult to adjust angular field

of view focusing around the subject.

To easily adjust angular field of view focusing around the sub-

ject, increase an angle (A) as w.

Power cord

LAN cable

Cable from an

external device

Bundle the cables and

the safety wire together

Safety wire holder

Safety wire

Anchor bolt x4

(not provided)

(A)

Subject