Preface
The network camera WV-NP240/WV-NP244 is designed to operate using a PC on a network
(10BASE-T/100BASE-TX) to monitor images. By connecting to a network (LAN) or the Internet,
images and audio from the camera can be monitored on a PC via a network.
Features
• Video signals captured by the progressive CCD (Charge-Coupled Device) will be convert-
ed into JPEG or MPEG-4 streams, and they can be monitored at up to 30 fps (VGA resolu-
tion).
• Audio captured by the built-in microphone can be monitored using a PC via a network.
• When connecting with a PoE (Power over Ethernet, IEEE802.3af compliant) device, power
will be supplied by simply connecting a LAN cable. This achieves reduction of installation
time including wiring work due to this wire-saving capability.
• 1/3 inch progressive CCD solid-state image sensor with VGA resolution (640 x 480 pixels)
achieves high-fidelity motion image scanning with high-resolution.
• The motion detection function that detects a motion in a designated surveillance area and
issue an alarm signal is featured.
• The FTP backup function and recording of each log on an optional SD memory card are
available using the featured SD memory card slot.
*1
It is necessary to configure the network settings of the PC and its network environment to
monitor images and audio from the camera on the PC. It is also necessary that a web
browser is installed on the PC.
*2
The motion detection function is not the dedicated function to prevent thefts, fires, etc..We
assume no responsibility whatsoever for any damages resulting from the use of the motion
detection function.
*3
Performance with this camera has been checked by using Panasonic's SD memory cards
(64 MB, 128 MB, 256 MB, 512 MB and 1 GB). If another SD memory card is used, this
camera may not operate properly.
*2
*3
*1
5
페이지 인쇄