Panasonic DMC-F5GF 서비스 매뉴얼 - 페이지 25

{카테고리_이름} Panasonic DMC-F5GF에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic DMC-F5GF 27 페이지.

8.3.4.
Blemish + burnin
1. Preparation of the SD CARD
a. Format the SD card.
b. Put PDME570C.elf and "cal.txt" into the SD card on root directory.
c. Rewrite the content of "cal.txt" to "cal burnin".
2. Setting the DSC for calibration
a. Set the battery to the camera
b. Insert the SD card.
c. Press shutter button and power button at the same time continuously to enter into the CAL mode. (Fig.4-1)
3. Execute the calibration
a. Press shutter button to start the calibration process.
b. The parameters will be saved automatically once calibration process finish.
c. The LCD turns green and show ''OK" (Fig.4-2), if succeed, LCD turns red and show NG code if fail.
(It takes about 30 minutes during executing this calibration.)
d. The camera turn off automatically, If succeed.
Fig.4-1
Fig.4-2
25