aquatherm Calorex AT500 설치 및 운영 매뉴얼 - 페이지 12

{카테고리_이름} aquatherm Calorex AT500에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. aquatherm Calorex AT500 16 페이지. Swimming pool & spa heat pumps

being heated is less. The AT500 Aquatherm heat pump comes equipped with two ther-

mostats. One thermostat is for the pool and the other one is for the spa. Select the

appropriate thermostat (pool or spa), whichever you are heating, using the Pool/Spa

selctor switch on your heater control panel. Set your valves in the appropriate posi-

tion.

Your sytem can be automated with the addition of an Automatic Thermostat Mod-

ule. This will save you from having to change the thermostat switch each time you

change from pool to spa and back again. You can also automate your pool and spa

isolation valves with a motorized valve module. For details, contact your installing

dealer.

SPA HEATING TIPS

When heating a spa, be sure to turn off the air blower. Air induced through spa jets

should also be eliminated, if possible. Air blowing into your spa while it is being

heated will very often neutralize or reduce the heat being put into the spa by the

heater, which means increased run time to heat your spa.

11.