Aquatic AQ-BC-6BT 사용자 및 설치 매뉴얼 - 페이지 3
{카테고리_이름} Aquatic AQ-BC-6BT에 대한 사용자 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aquatic AQ-BC-6BT 14 페이지. Hide-away media player for bluetooth audio & mp3 devices
Aquatic AQ-BC-6BT에 대해서도 마찬가지입니다: 사용자 및 설치 매뉴얼 (16 페이지), 사용자 및 설치 매뉴얼 (13 페이지), 소유자 매뉴얼 (11 페이지)
페이지 인쇄Getting Started
1.1 Contents
• AQ-BC-6BT BlueCube Media Player
• Wiring Harness (AQ-UNH-2)*
• Four (4) Stainless Steel Mounting Screws
*Retail packaged models only.
1.2 Connections (see Diagram 1.2.1)
1. 12-pin Watertight Harness
The 12-pin harness supplies power and ground connections to the BlueCube Media Player
and four (4) speaker channel output connections from the BlueCube Media Player (see
Wiring Diagram 1.3.1 on page 4).
Do not cut or modify the 12-pin harness on the BlueCube side or warranty will be void.
2. Auxiliary Outputs
Allows external amplifiers to be connected to power additional speakers.
3. Auxiliary Inputs
Allows an additional RCA input, from a standalone unit or another stereo source.
4. Remote 8-pin DIN Cable (x2)
Allows connection of the optional wired and wireless Remote Controls (sold separately).
5. 12V DC External Trigger (x2)
Allows for external lighting or relays to be triggered (3A max load). This feature is only
available when using the optional Remote Controls (sold separately).
6. Power On LED
When the BlueCube is powered On the LED will illuminate red.
7. Bluetooth Halo Aerial Connector
Connect the Bluetooth Halo Aerial Technology Antenna (AQ-BTANT-1) to the male SMA
connector. Do not apply excessive torque on the SMA connector (no more than 0.5N-m). Use
hands to tighten the connection (do not use a wrench). See section 1.5
8. Power Attenuation Wires
Allows the output level to be adjusted from a factory preset of -3dB to either -6dB, 0dB or
+6dB. See section 1.6 for further details.
Aquatic AV does not recommend the wired Remote Control for use in spa applications.
www.aquaticav.com
BlueCube Media Player AQ-BC-6BT
• User/Installation Manual
• Mounting Template*
• Bluetooth Antenna
3