Aquatic MP6 사용자 및 설치 매뉴얼 - 페이지 16

{카테고리_이름} Aquatic MP6에 대한 사용자 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aquatic MP6 20 페이지. Basic din series stereo

Additional Features

1. Connect your audio device to the rear RCA connectors using a stereo RCA

cable.

2. Press MODE on the stereo to select 'AUX' mode.

3. Play the song from your auxiliary audio device and the sound will play

through the stereo.

Always ensure you connect and disconnect the stereo with dry hands!

The MP600 stereo has two independent 12V 'accessory' triggers. These could

activate any 12V based device, such as 12V lights or 12V motors.

In any operational mode, press the 12V TRIGGER button to activate. Press

again to deactivate.

If using two external trigger wires you can also activate the second external

trigger by pressing and holding the 12V TRIGGER button to activate. Press

and hold again to deactivate.

Aquatic AV strongly recommend you speak to our technical service staff or your local Aquatic AV

dealer if you are considering using this feature.

Load on External Trigger should not exceed 3A.

MP600: MP6 Basic DIN Series Stereo