Aquatic MP6 사용자 및 설치 매뉴얼 - 페이지 6

{카테고리_이름} Aquatic MP6에 대한 사용자 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aquatic MP6 20 페이지. Basic din series stereo

Getting Started

1.5 Installation

PLEASE READ THIS INSTRUCTION MANUAL BEFORE INSTALLATION AND

OPERATION.

Aquatic AV recommends installtion of this stereo by a professional

technician.

A mounting template is included (retail packaged models only). Aquatic AV

recommends using the 'measure twice, cut once' method!

1. Check clearances on both sides of a planned installation area before drilling

any holes.

2. Cut the mounting hole using the method detailed below.

3. When routing RCA cables, keep them away from power cables and output

speaker wires.

4. Once complete make sure the outside surface is clean and clear of debris.

The MP600 stereo has an external water/dust proof gasket which requires a

clean and flat surface for best performance.

1. Using a jigsaw cut a rectangluar hole with dimensions 183mm (W) x 53mm

(H).

183mm

1.5.2 Installation

1. Slide the mounting sleeve into mounting hole.

2. Remove mounting sleeve handles by bending the backing bracket handles

until they break off as shown below.

*Retail packaged models only.

53mm

MP600: MP6 Basic DIN Series Stereo

www.aquaticav.com

Not to scale!

Please use

the mounting

template

provided*