Panasonic SA-AK750 사용 설명서 - 페이지 17
{카테고리_이름} Panasonic SA-AK750에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic SA-AK750 28 페이지. Panasonic sc-ak750 stereo systems: operating instruction
Panasonic SA-AK750에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지)
페이지 인쇄
Compatible iPod
Compatible iPod
Name
iPod nano
2nd generation (aluminum)
iPod
5th generation (video)
iPod
5th generation (video)
iPod nano
1st generation
iPod
4th generation (color display)
iPod
4th generation (color display)
iPod
4th generation
iPod
4th generation
iPod mini
Note:
Compatibility depends on the software version of your iPod.
Recording from an iPod
Recording from an iPod
1
Press [4, REW/ ] or [4,
desired track for recording.
Press [¶, REC] on the main unit to start recording.
2
Note:
Pressing [6, OPTION] will pause iPod's playback, but the
recording function will continue.
Press [7, CLEAR] to stop the recording.
iPod is a trademark of Apple, Inc., registered in the U.S.
and other countries.
Memory Size
2GB, 4GB, 8GB
60GB, 80GB
30GB
1GB, 2GB, 4GB
40GB, 60GB
20GB, 30GB
40GB
20GB
4GB, 6GB
/ FF] to select the
Changing the main unit and
Changing the main unit and
MUSIC PORT
remote control mode
remote control mode
The remote control and main unit are factory set to
"REMOTE 1" mode.
If your remote control affects other equipment during
operation, you can switch to operate in "REMOTE 2" mode.
To switch to "REMOTE 2" mode
1
While pressing and holding [MUSIC PORT] on the main
unit
Press and hold [2] until "REMOTE 2" appears on
the main unit display.
Press and hold [ENTER] and [2] for at least 2
2
seconds.
The main unit and remote control are now set to
operate in "REMOTE 2" mode.
To return to "REMOTE 1" mode
Perform steps 1 and 2 above but use [1] instead of [2] for
both steps. ("REMOTE 1" appears on the main unit during
step 1.)
The remote control cannot work with the main unit if
their modes are different.
"REMOTE 1" or "REMOTE 2" appears on the main unit
display when you operate the remote control.
*
If "REMOTE 1" appears (The main unit is in "REMOTE 1"
mode.)
Press and hold [ENTER] and [1] on the remote control for
at least 2 seconds.
If "REMOTE 2" appears (The main unit is in "REMOTE 2"
mode.)
Press and hold [ENTER] and [2] on the remote control for
at least 2 seconds.
*
17
RQT8043