DIAVITE AG DIAVITE Compact VH 매뉴얼 - 페이지 5

{카테고리_이름} DIAVITE AG DIAVITE Compact VH에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DIAVITE AG DIAVITE Compact VH 14 페이지.

First step:

1.2

1. Press any key - the instrument will be ready for operation after a few seconds.

2. Press the key

3. Press the key

4. Press the key

5. Press the key

6. Press the key

7. Press the key

8. Press the key

1.3

Under the cover at the narrow rear of the instrument

there are connections for the electrical mains supply

and an USB port for connection to a computer.

1.3.1

Mains adapter 90 – 264 VAC / 50 – 60 cycles

The mains adapter connection serves for the electric power supply of the instrument. If this adapter is

connected, the instrument is provided with electric current during operation and simultaneously, the

batteries are being charged – if necessary.

Only the original mains adapter may be used for this purpose. It is specially designed for use with

many international electric mains tensions (for admitted values refer to: Technical data, 'mains

adapter', page 2).

Suitable plugs for corresponding national standards are available from the agent or from electro-

technical stores.

1.3.2

The interface USB serves for the direct connection to a computer. This must be equipped with a

suitable software (option) for receiving the data.

DIAVITE COMPACT

Setting of language

, in the display appears: 'Menu: Tracer'

three times - the display reads: 'Menu: Language'

once, the display reads: 'Language: German'

once, the display reads: 'Language: Français'

several times, further languages will appear, one after the other

you are back in the menu

, you are in the measuring mode again

USB