DieHard 200.71231 소유자 매뉴얼 - 페이지 7
{카테고리_이름} DieHard 200.71231에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DieHard 200.71231 16 페이지. Battery charger 50/15/2 amp manual engine starter with battery tester 225/125 amp
DieHard 200.71231에 대해서도 마찬가지입니다: 소유자 매뉴얼 (14 페이지)

ATEMPORARY a dapter
m ay be used to connect the
charger to a two-pole outlet if a propedy grounded
outlet is not available. Use the adapter ONLY until a
propedy grounded outlet can be installed by a qualified
electrician.
AL
WARNING:
Improper
adapter
con-
nection can result in electrical
shock.
Before using an adapter as illustrated, be certain that
the center screw of the outlet plate is grounded. The
green colored grounding clip of the adapter must be
attached by a metal screw to a properly grounded
outlet. If unsure whether outlet is propedy grounded,
contact a professional electrician. If necessary,
replace the original outlet cover screw with a longer
one that will secure the grounding clip to the outlet
cover and make a ground connection to the grounded
outlet.
Using an extension
cord
The use of an extension cord is not recommended. If
you must use an extension cord, please make sure
that you follow these guidelines:
• Make sure the pins on the plug of the extension cord
are the same number, size, and shape as those of
the plug on the charger,
• Use only 3-conductor (grounded) extension cord
when necessary.
• Check-that the extension cord is properly wired and
in good electrical condition.
• Use the recommended minimum AWG (American
Wire Gauge) to be sure that wire size is large
enough for the rating of the charger.
"AWG=Amerioan
Wire Gauge