Olympus BXC-FSU 사용 설명서 - 페이지 8

{카테고리_이름} Olympus BXC-FSU에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus BXC-FSU 41 페이지. Modular microscope assemblies hardware

페이지 인쇄

Study the meaning of the symbol and always use the product in the safest possible manner.

Symbol

Indicates a non-specific general hazard. Follow the description given after this symbol or in the instruction manual

Indicates that the seesaw type main switch is ON.

(Seesaw type is the type of switch where ON or OFF is selected by pressing it to ON or OFF side.)

Indicates that the seesaw type main switch is ON.

2.7 Caution engraving/label

Safety labels are placed on the portions which particularly require special cautions when using or operating this product.

Be sure to follow these instructions.

Label position

Safety label

(A), (B)

If a caution engraving or label is dirty or peeled off, contact us for the replacement or other inquiry.

2.8 Specifications

Rating

Operating environment

Temperature

Humidity

Variation of power supply voltage ± 10 %

Pollution degree

Installation category (excess

voltage category)

Conditions for safety standards

2. Safety precautions

Meaning

Instructions in the instruction manual

[Caution for electric safety]

[Caution for prevention of electric shock]

AC adapter Input:

100-240 V

50/60 Hz 1.4 A(Max)

Output:

24.0 V

2.71 A(Max)

Control box Input:

24V

2.5A(Max)

5 to 40°C (41 to 104 °F)

0 to 85%

2 (in accordance with IEC60664)

II (in accordance with IEC60664)

Indoor use

Altitude: Max. 2000 meters

Temperature: 5 to 40 °C (41 to 104 °F)

Relative humidity: 20 to 80% for temperatures up to 31 °C (88 °F)

(without condensation) In case of over 31 °C (88 °F), the relative

humidity is decreased linearly through 70% at 34 °C (93 °F), 60% at 37

°C (99 °F), and to 50% at 40 °C (104 °F).

Relevant page

2.7 Caution engraving/label