Alphacom Regency 605 사용자 설명서 - 페이지 14
{카테고리_이름} Alphacom Regency 605에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alphacom Regency 605 18 페이지. Regency range headsetphone
페이지 인쇄13.8
STORING TElEPHONE NUMBERS
"ONE TOUCH" lOCATIONS
1.
Ensure telephone is plugged into telephone socket. Lift handset or
press Hands-free button.
2.
press the Store button.
3.
Dial the telephone number you wish to store.
4.
press one of the "One Touch" direct memory button.(The LCD will show
the memory location E01~E10)
5.
Repeat steps 2 to 4 for remaining nine "One Touch" location.
6.
Replace Handset or press Hands-free
"TWO TOUCH" lOCATIONS
1.
Ensure telephone is plugged into telephone socket. Lift handset or
press Hands-free button.
2.
press the Store button.
3.
Dial the telephone number you wish to store.
4.
press the Memory button and then press one of the "One Touch" direct
memory button (The LCD will show the memory location E11~E20)
5.
Repeat step 1 to 4 for any other number you wish to store allocating
a different keypad number for each and then replace the handset or
press Hands-free button.
13.9
DIAllING STORED NUMBERS FROM MEMORy
a.
"One Touch" locations (M1~M10)
Lift handset or press Hands-free button, await dial tone and press
appropriate direct memory button. The stored number will be dialed
out automatically.
b.
"Two Touch" locations (M11~M20)
Lift handset or press Hands-free button, await dial tone and press
the Store button followed by the "One Touch" button under which
the desired number is stored. The stored number will be dialed out
automatically.
Note: If you wish to change a number in a memory location, simply follow the
instructions for storing a number. Entering the new number will automatically erase the
previous number.
12