Alphalite Alpha FPL-22H 설치 지침 - 페이지 3

{카테고리_이름} Alphalite Alpha FPL-22H에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Alphalite Alpha FPL-22H 4 페이지. Led flat panel

3. Dismantle one piece of frame and put the LED panel into the frame.

4. Fix the frame by putting back the dismantled part.

Note:The drivers and connector must be fixed to the back of LED panel by adhesive tape.

Suspension Mount Installation Steps (Required additional kit from manufacturer):

1. Mark fixing positions on the ceiling. Ensure the holes does not impinge on joists, pipe work, cables or other building services.

2. Attach base of suspension kit to the ceiling using the screws provided and secured.

Attach suspension wire to base and screw in tight.

3. Attach the four brackets to the two sides of panel and secured.

5. Attach suspension wire and hook the triangle on four plates.

6. Adjust length of suspension wire by pressing nipple on top. Ensure both wires are same length.

7. Connect power.

Note: The drivers and connector must be fixed to the back of the panel by adhesive tape.

(Note: This installation method is not suitable to be used for products with dimensions of 1195*595 / 1212*603.)

Panel size

2'x2'

1'x4'/ 2'x4'

10715 Springdale Ave, Unit 4, Santa Fe Springs, CA 90670

Position for making holes

A(inch)

B(inch)

22.5"

17"

43"

Tel: 1-888-287-9228

Fax: 1-888-258-9183