Axor Edge 46440 1 Series 설치/사용자 지침/보증 - 페이지 2

{카테고리_이름} Axor Edge 46440 1 Series에 대한 설치/사용자 지침/보증을 온라인으로 검색하거나 PDF를 다운로드하세요. Axor Edge 46440 1 Series 20 페이지.

E N G L I S H

T EC HN IC A L I N F ORMAT IO N

Water pressure

Recommended

Maximum

Hot water temp.

Recommended

Maximum

Max. flow rate

spout

handshower

* Please know and follow all applicable local plumbing

codes when setting the temperature on the water heater.

I NSTA LL AT I O N CO N SID E R ATI ONS

⁄ For best results, Hansgrohe recommends that this unit

be installed by a licensed, professional plumber.

⁄ Please read over these instructions thoroughly before

beginning installation. Make sure that you have all

tools and supplies needed to complete the installation.

⁄ This trim is for use with rough 10452181 (not includ-

ed). The rough must be installed and the finished floor

surface completed and made watertight.

This unit is not anti-scald. In Massachusetts, or

if required by local plumbing code, install an

approved water temperature limiting device

conforming to ASSE 1070 (not available from

Hansgrohe).

15 - 75 PSI (0.1 - 0.5 MPa)

145 PSI (1 MPa)

120°-140° F (48° - 60° C)*

158°F (70° C)*

5.8 GPM (22 L/min)

1.75 GPM (6.6 L/min)

⁄ Protection against backflow is provided by check

valve and an automatically resetting diverter.

⁄ This showerhead is for use with an automatically

compensating valve rated at 1.3 GPM (4.9 L/min)

or less.

⁄ To prevent scald injury, the maximum output tempera-

ture of the shower valve must be no higher than 120°F

(49°C). In Massachusetts, the maximum output tem-

perature can be no higher than 112°F (44°C).

⁄ Keep this booklet and the receipt (or other proof of

date and place of purchase) for this product in a safe

place. The receipt is required should it be necessary

to request warranty parts.