ABB ACH550 series 설치, 운영 및 유지보수 매뉴얼 - 페이지 8
{카테고리_이름} ABB ACH550 series에 대한 설치, 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ABB ACH550 series 18 페이지. Pumpsave 4.1, energy savings calculator for pump drives
ABB ACH550 series에 대해서도 마찬가지입니다: 사용자 설명서 (14 페이지), 빠른 시작 매뉴얼 (6 페이지)
페이지 인쇄
ACH550 Installation, Operation and Maintenance Manual
RHTR Temperature
HI / LO Jumper (X1)
Default Setting
(X1 jumper in LO position)
Alternate Setting
(X1 jumper in HI position)
The alternate (HI) setting further reduces the likelihood
of condensate in high humidity environments.
WARNING! Check the motor and motor wiring insulation before connecting the
ACH550 to line power. Follow the procedure on page 12. Before proceeding with the
insulation resistance measurements, check that the ACH550 is disconnected from
incoming line power. Failure to disconnect line power could result in death or serious
injury.
Note: For the remainder of the wiring (motor and control wiring) refer to page 7.
UL Type / NEMA 3R
Enclosures
Heater ON
Heater OFF
Temperature
Temperature
14.4 °C
21.4 °C
58 °F
70.5 °F
17.8 °C
24.7 °C
64 °F
76.5 °C
Input
Power
83
ACH550-PCR/PDR