Axor Uno2 38040XX1 설치 지침 / 보증 - 페이지 4
{카테고리_이름} Axor Uno2 38040XX1에 대한 설치 지침 / 보증을 온라인으로 검색하거나 PDF를 다운로드하세요. Axor Uno2 38040XX1 8 페이지. Axor - hansgrohe, inc. lavatory faucet installation instructions / warranty
페이지 인쇄Install the pop-up drain
Remove the plunger assembly.
•
Unscrew the drain outlet flange from the tee.
•
Unscrew the tailpiece from the tee. Wrap the threads with plumbers' thread
•
tape and replace.
Install the white, flexible sealing gasket to the flange. Sit it in the sink outlet.
•
From under the sink, install the black mack gasket, white friction ring , and
•
retainer nut to the flange. Do not tighten the nut against the bottom of the
sink at this time.
Thread the tee and tailpiece to the flange. The pivot must face the faucet. If
•
necessary, turn the drain assembly.
Tighten the retainer nut.
•
Sit the plunger assembly in the drain.
•
Install the horizontal rod so that the end goes through the loop in the bottom
•
of the height adjuster.
Install and hand tighten the pivot ball nut.
•
Attach the swivel connector to the end of the horizontal rod.
•
Attach the swivel connector to the end of the vertical rod. Position as
•
desired, and tighten with a small, flathead screwdriver.
4