Axor Citterio 39156XX1 설치 지침 매뉴얼 - 페이지 5

{카테고리_이름} Axor Citterio 39156XX1에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axor Citterio 39156XX1 8 페이지. Faucet

Install the pop-up drain

Remove the plunger assembly.

Unscrew the drain outlet flange from the tee.

Unscrew the tailpiece from the tee. Wrap the

threads with plumbers' thread tape and replace.

Install the white, flexible sealing gasket to the

flange. Place it in the sink outlet.

From under the sink, install the black mack gas-

ket, white friction ring and retainer nut to the

flange. Do not tighten the nut against the bottom

of the sink at this time.

Thread the tee and tailpiece to the flange. The

pivot must face the faucet. If necessary, turn the

drain assembly.

Tighten the retainer nut.

Place the plunger assembly in the drain.

Install the horizontal rod so that the end goes

through the loop in the bottom of the height

adjuster.

Install and hand tighten the pivot ball nut.

Attach the swivel connector to the end of the

horizontal rod.

Attach the swivel connector to the end of the

pull rod. Position as desired and tighten with a

small, flathead screwdriver.

pull rod

pivot ball nut

horizontal rod

swivel connector

plunger

height adjuster

flange

sealing gasket

mack gasket

friction ring

retainer nut

tee