Axor Massaud 18013001 설치 지침 매뉴얼 - 페이지 8

{카테고리_이름} Axor Massaud 18013001에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axor Massaud 18013001 12 페이지. Lavatory/ bidet faucet

Install the pop-up drain

Remove the plunger assembly.

Unscrew the drain outlet flange from the tee.

plunger

Unscrew the tailpiece from the tee. Wrap the

height adjuster

threads with plumbers' thread tape and replace.

Install the white, flexible sealing gasket to the

flange

flange. Place it in the sink outlet.

From under the sink, install the black mack gas-

ket, white friction ring and retainer nut to the

flange. Do not tighten the nut against the bottom

sealing gasket

of the sink at this time.

Thread the tee and tailpiece to the flange. The

mack gasket

pivot must face the faucet. If necessary, turn the

drain assembly.

friction ring

vertical rod

Tighten the retainer nut.

Place the plunger assembly in the drain.

retainer nut

Install the horizontal rod so that the end goes

through the loop in the bottom of the height

tee

adjuster.

pivot ball nut

Install and hand tighten the pivot ball nut.

Attach the swivel connector to the end of the

horizontal rod.

Attach the swivel connector to the end of the

horizontal rod

vertical rod. Position as desired and tighten

with a small, flathead screwdriver.

tailpiece

swivel connector