ABB ControlMaster CM15 지침

{카테고리_이름} ABB ControlMaster CM15에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. ABB ControlMaster CM15 4 페이지.

ABB ControlMaster CM15 지침
Instruction IN/RandC/003–EN Rev.A
ControlMaster controllers and indicators
ConfigPilot
Creating, uploading and downloading configurations
Measurement made easy
1 Introduction
A configuration for a ControlMaster (both controller and
indicator) can be created, modified and backed up to a
PC using the ConfigPilot software program.
ConfigPilot is a utility used in conjunction with a USB
IrDA adaptor and can be downloaded from:
www.abb.com/recorders.
2 Items required
2.1 ConfigPilot kit
Description
USB IrDA adaptor
This publication
Table 2.1 ConfigPilot kit CM30/0715
Part no.
B12895
IN/RandC/003-EN
3 Firmware revision
The following instrument firmware revisions are compatible with
ConfigPilot:
Instrument
Firmware revision
CM15|P2|00|02|22
CM15
CM15|P2|01|02|22
CM10|P2|00|02|22
CM10
CM10|P2|01|02|22
CM30
CM30|P2|00|02|22
CM50
CM50|P2|00|02|22
CMF160
CMF160|P2|00|02|22
CMF310
CMF310|P2|00|02|22
Table 3.1 Instrument firmware revisions
IMPORTANT (NOTE) If using an earlier firmware
revision, contact your local ABB representative for more
information.
or later
or later
or later
or later
or later
or later