Axxera AXM140BT 소유자 매뉴얼 - 페이지 2

{카테고리_이름} Axxera AXM140BT에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axxera AXM140BT 19 페이지.

Preparation

Please read entire manual before installation.

Before You Start

• Disconnect negative battery terminal. Consult a qualified technician for instructions.

• Avoid installing the unit where it would be subject to high temperatures, such as from

direct sunlight, or where it would be subject to dust, dirt or excessive vibration.

Getting Started

• Remove trim ring from unit.

• Remove 2 transit screws located on top of the unit.

• Insert the supplied keys into the slots as shown, and slide the unit out of the mounting

sleeve.

• Install mounting sleeve into opening, bending tabs to secure.

• Connect wiring harness and antenna. Consult a qualified technician if you are unsure.

• Certain vehicles may require an installation kit and/or wiring

harness adapter (sold separately).

• Test for correct operation and slide into mounting sleeve to secure.

• Snap trim ring into place.

KEYS

TYPICAL FRONT-LOAD

DIN MOUNTING METHOD

AXM140BT

INSTALLATION

HEAD

UNIT

MOUNTING

SLEEVE

INSTALLATION

MOUNTING KIT

OR DASHBOARD