ARCCAPTAIN ARC160 사용자 설명서 - 페이지 12
{카테고리_이름} ARCCAPTAIN ARC160에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ARCCAPTAIN ARC160 15 페이지. Inverter welding machine
5.2 Strap Installation
Step 1: Separate the velcro.
Step 2: Pull out one side through the strap hole
on the front panel with hook side of the velcro
up.
Step 3: Pull out it to well stick hook side of the
velcro to loop side and across the nylon buckle.
Repeat it on the other side.
Step 4: Adjust the length by pulling the nylon
buckle (as shown in the picture).
Step 5: Proper state after installation:
1. Strap does not twist;
2. Buckle side of shoulder pad is up, while its
flat side faces the machine (as shown in the
picture);
3. Straps are well locked.
9