Axxess AXDSPX-GM30 설치 지침 매뉴얼 - 페이지 7

{카테고리_이름} Axxess AXDSPX-GM30에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axxess AXDSPX-GM30 16 페이지. Gm dsp interface with pre-wired harness 2019-up

Configuration

• Identify - Click this button to send a test tone to the front left speaker*.

* Only installations using the front left output (white RCA jack).

• Reset to Defaults - Resets the interface to factory settings. During the reset process the amp(s)

will shut off for 5-10 seconds.

• Vehicle Type - Select the vehicle type from the drop down box, then click the apply button.

• Lock Down - Click this button to save the selected settings.

Attention!

This must be done before closing the app or cycling the key otherwise all new

changes will be lost!

MOBILE APP

(CONT.)

• Save Configuration - Saves the current configuration to the mobile device.

• Recall Configuration - Recalls a configuration from the mobile device.

• About - Displays information about the app, vehicle, interface, and mobile device.

• Set Password - Assign a 4-digit password to lock the interface. If no password is desired, use

"0000". This will clear out any currently set password. It is not necessary to lock down the

interface when setting a password.

Note: A 4-digit only password must be chosen otherwise the interface will show "password

not valid for this device".

Continued on the next page

REV. 8/4/2020 INSTAXDSPX-GM30