Axxess LC-CHRC-01 설치 지침 매뉴얼 - 페이지 3

{카테고리_이름} Axxess LC-CHRC-01에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axxess LC-CHRC-01 8 페이지. Ram data interface 2013-2017

INSTALLATION

With the key in the off position:

• Connect the LC-CHRC-01 harness into the interface, and then to the harness in the vehicle.

Note: If using the ASWC-1, connect it after you initialize and test the LC-CHRC-01, with the key

in the off position.

PROGRAMMING

Attention! If the interface loses power for any reason, the following steps will need to be

performed again. Also, if installing an ASWC-1 connect it after you initialize and test the interface/

radio, with the key in the off position.

• Turn the key (or push-to-start button) to the ignition position and wait until the radio comes on.

Note: If the radio does not come on within 60 seconds, turn the key to the off position,

disconnect the interface, check all connections, reconnect the interface, and then try again.

• Turn the key to the off position, and then to the accessory position. Test all functions of the

installation for proper operation, before reassembling the dash.

REV. 9/30/2019 INSTLC-CHRC-01