Epson Artisan 800 - All-in-One Printer 네트워크 설치 매뉴얼 - 페이지 24

{카테고리_이름} Epson Artisan 800 - All-in-One Printer에 대한 네트워크 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Artisan 800 - All-in-One Printer 29 페이지. Artisan 700/800 series
Epson Artisan 800 - All-in-One Printer에 대해서도 마찬가지입니다: 네트워크 설치 매뉴얼 (41 페이지), 사용자 설명서 (34 페이지), 사용자 설명서 (38 페이지), 카트리지 교체 (2 페이지), 사양 (2 페이지), 빠른 시작 매뉴얼 (8 페이지), 제품 지원 게시판 (5 페이지), 설정 정보 (3 페이지), 자주 묻는 질문 (4 페이지)

Scanning Problems

Cannot find the scanner or start Epson Scan

■

If you're using Mac OS X, make sure that you configured the Epson Scan

network settings (see page 18).

■

If network communication was interrupted while starting Epson Scan, exit

Epson Scan, and restart it after a few seconds. If Epson Scan cannot restart,

turn the printer off and back on, and then try restarting Epson Scan. Check

the

Timeout Setting

Scan Help.

■

If you have a firewall or Internet security software installed, the search feature

EPSON Scan Settings

Network Status Sheet (see page 25), click

Enter address

■

If you are scanning a large document at high resolution, a communication

error may occur. If the scan did not complete, lower the resolution.

■

The printer's IP Address may have changed. If the printer is set to obtain an IP

address automatically, the IP address may change each time the printer is

turned on. If the IP address has changed, you will need to repeat the steps in

"Configuring Epson Scan Network Settings" on page 18. To keep the IP

address from changing, try the following: always power on your network

devices in the same order, always keep the printer on, or set your DHCP

server to reserve an IP address for the printer (see your router's documentation

for details).

Troubleshooting

EPSON Scan Settings

may not work correctly. In this case, print a

, and enter the IP address manually.

. For details, see the Epson

EPSON Scan Settings

Add